| Customization: | Available |
|---|---|
| Thermal Protection: | A |
| Standard: | GB 8965-98 |
|
Still deciding? Get samples of US$ 135/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Applicable to body protection, the firefighter command suit is a windbreaker design with three layers of outer layer, waterproof and breathable layer (heat insulation layer), and comfort layer. It has the advantages of flame retardant, heat insulation, waterproof and breathable, antistatic, etc.
At the bust, hem, and cuffs of the command suit, a 360° reflective strip with a width of no less than 50mm is stitched to identify.
| NO. | ITEM | STANDARD | |||
| 1 | outer layer | Flame retardancy | Longitudinal | burn time(s) | ≤2 |
| loss length(mm) | ≤100 | ||||
| Test phenomenon | No melting and dripping | ||||
| latitudinal | burn time(s) | ≤2 | |||
| loss length(mm) | ≤100 | ||||
| Test phenomenon | No melting and dripping | ||||
| Breaking strength | longitude(N) | ≥650 | |||
| latitude(N) | ≥650 | ||||
| Tear strength | longitude(N) | ≥100 | |||
| latitude(N) | ≥100 | ||||
| Humidity resistance | ≥3 | ||||
| Thermal stability | Shrinkage rate(%) | ≤10 | |||
| Test phenomenon | No melting and dripping | ||||
| Color fastness | washable stains | ≥3 | |||
| water-resistant friction | ≥3 | ||||
| 2 | Waterproof breathable layer heat insulation layer |
Hydrostatic pressure resistance | ≥50 | ||
| Oil Repellent Performance | ≥3 | ||||
| Moisture permeability(g/m2.24h) | ≥5000 | ||||
| Thermal stability | Shrinkage rate(%) | ≤10 | |||
| Test phenomenon | No melting and dripping | ||||
| 3 | comfortable layer | Breaking strength | longitude(N) | ≥300 | |
| latitude(N) | ≥300 | ||||
| 4 | Overall thermal protection performance(cal/cm2) | ≥28 | |||
| 5 | Seam breaking strength | longitude(N) | ≥650 | ||
| latitude(N) | ≥650 | ||||
Instructions:
(1). the clothing should be cleaned immediately after wearing.
(2). washing should be as much as possible to wash the surface layer. It can be washed with neutral detergent, then dry and then cool after washing: if drying, the temperature should not exceed 60 ºC when drying, in order to prevent the air permeation layer from blocking the micro pores and affect the air permeability effect.
(3). clothing should be stored in a ventilated and dry room, avoid prolonged exposure to the sun, and avoid storing with dangerous chemicals, and store the whole box on a board or shelf to prevent dampness.
Can delivery by sea, by air and express
){kind=link}